ZENOLEX PC - POLYCARBONATE - TECHNICAL DATA

DOWNLOAD PDF TECHNICIAL DATA
ZENOLEX PC PROPERTIES VALUE UNIT TEST METHOD
GENERAL
Density 1.2 g/cm3 ISO 1183-1:2019 Method A
Water Absorption 0.2 % ISO 62:2008
MECHANICAL
Tensile Strength 60 MPa ISO 527-2:2012
Tensile Strain at Break 80 % ISO 527-2:2012
Tensile Modulus 2300 MPa ISO 527-2:2012
Flexural Strength 90 MPa ISO 178:2019 Method A,B
Flexural Modulus 2300 MPa ISO 178:2019 Method A,B
Charpy Impact Strength, Notched 40 kJ/m2 ISO 179-1:2010
Izod Impact Strength, Notched 70 kJ/m2 ISO 180:2000+Amd.2:2013
Rockwell Hardness, L-scale 100 ASTM D785
Rockwell Hardness, M-scale NA ASTM D785
Rockwell Hardness, R-scale N/A ASTM D785

Product Disclaimer:

This information provides reliable and accurate data to the best of our knowledge at the time of publishing. Due to our inability to control conditions of use and application, we are unable to make any recommendations or suggestions. The EGR Group (Oakmoore Pty Ltd) assumes no liability for use of information presented herein.

ZENOLEX PC PROPERTIES VALUE UNIT TEST METHOD
THERMAL
Vicat Softening Temperature 135 ℃ ISO 306:2013
Heat Deflection Temperature, 1.82MPa 125 ℃ DIN53752
Coefficient of Linear Thermal Expansion 7 m/m.K x 10 -5 DIN53752
Self Ignition Temperature 550 ℃ ASTM D 1929
Flash Ignition Temperature 480 ℃ ASTM D 1929
Glow Wire Ignition Temperature (3 mm) 900 ℃ IEC 60695-2-13
Burning Behaviour, Vertical N/A UL 94-2013/ Rev.9-2018 Section 8
Burning Behaviour, Horizontal (1.5 mm) HB UL 94-2013/ Rev.9-2018 Section 7
Continuous Service Temperature 110 ℃
Short Term Service Maximum Temperature 120 ℃
Moulding Range 200-260 ℃
OPTICAL
Light Transmission Clear (3mm) 88 % 520nm
Light Transmission Grey (3mm) 22 % 520nm
Light Transmission Opal (3mm) 20 % 520nm
Refractive Index 1.59 nD DIN5036-3
Haze <0.8 % ISO 14782